Scrubmaster B400 R.
High-capacity battery-powered ride-on scrubber-drier for very large areas, with 123 or 155 cm three-disc cleaning widths, 400-litre tanks and theoretical performance up to 14,000 m²/h..
Australia Wide Delivery
Expert Support
Technical advice from selection to commissioning.
Serviced & Maintained
Built for Tough Sites
Maximum productivity and flexibility for very large areas.
The Hako Scrubmaster B400 R is the dedicated scrubber-drier model in Hako’s B400-R Series, engineered for productive wet cleaning across very large industrial, logistics, transport and commercial floor areas.
Available with 123 or 155 cm three-disc brush units, the machine delivers theoretical area performance from 11,000 to 14,000 m²/h while large 400 L solution and recovery tanks support long cleaning cycles with fewer interruptions.
Despite its size, the B400 R remains highly manoeuvrable, with compact turning geometry and an optional quick-connect system that allows additional pre-sweep tools or a light-debris collector to be fitted when required.
- 123 or 155 cm working width
- 11,000–14,000 m²/h theoretical output
- 400 L solution / 400 L recovery tanks
- 36 V battery system
- 540 / 810 Ah battery configurations
- 136 or 166 cm squeegee width
- Up to 15% gradient capability with optional X-AC
- Approx. 2,110–2,130 kg ready for use
Technical Specifications
Key technical data for the Scrubmaster B400 R scrubber-drier (not the B400 RM or B400 RH combination machines).
Cleaning Performance
Published Scrubmaster B400 R performance using the current Hako Australia product page as the primary source, supported by the supplied Hako B400-R Series brochure and current Hako technical information.
| Specification | Detail |
|---|---|
| B400 R 1230 | 123 cm / 11,000 m²/h |
| B400 R 1550 | 155 cm / 14,000 m²/h |
| Working speed | Up to 9 km/h |
| Solution / recovery tank | 400 / 400 L |
| Squeegee width | 136 or 166 cm |
| Brush system | 3 disc brushes |
| Gradient capability | 6% standard / up to 15% with optional X-AC |
| Turning circle | Approx. 213 / 228 cm |
Actual productivity varies with floor conditions, soil level, operator, brush configuration, battery configuration and site requirements.
- This page is specifically for the Scrubmaster B400 R scrubber-drier. The B400 RM manual-emptying sweeper-scrubber and B400 RH high-dump sweeper-scrubber variants are intentionally excluded.
High Area Performance
Up to 14,000 m²/h theoretical performance supports productive cleaning of very large commercial and industrial floor areas.
Two Working Widths
Choose 123 cm or 155 cm three-disc brush configurations to match site access and productivity requirements.
400-Litre Tanks
Large matched solution and recovery tanks reduce refill and emptying interruptions during long cleaning shifts.
Compact Turning Geometry
The B400 R can complete U-turns in aisles as small as approximately 230 cm, helping maintain productivity in warehouse and logistics environments.
Quick-Connect System
Optional quick-connect tools allow the machine to be upgraded with a pre-sweep broom, pre-sweep mop or light-debris collector where required.
X-AC Drive Option
Optional front and rear X-AC drive supports cleaning on gradients up to 15% without sacrificing traction.
Hako AquaControl
Intelligent solution management can reduce water use by up to 50% while maintaining consistent cleaning performance.
Hako AntiBac®
Antibacterial tank properties support hygiene-sensitive cleaning and help reduce odour development.