Scrubmaster B260R.
Heavy-duty battery-powered ride-on scrubber-drier for expansive commercial and industrial areas, with 260-litre tanks, multiple disc or cylindrical brush configurations and theoretical cleaning performance up to 8,610…
Australia Wide Delivery
Expert Support
Technical advice from selection to commissioning.
Serviced & Maintained
Built for Tough Sites
Heavy-duty floor care for expansive industrial environments.
The Hako Scrubmaster B260R is a heavy-duty battery-powered ride-on scrubber-drier designed for long operating periods across large commercial, logistics and industrial floor areas.
Four available brush configurations provide 108 or 123 cm working widths using either two or three disc brushes or a twin cylindrical-brush system, allowing the machine to be matched to different floor conditions and cleaning requirements.
Large 260 L solution and recovery tanks, battery capacities up to 480 Ah, ergonomic controls and optional pre-sweeping equipment support productive cleaning with fewer interruptions across large and complex sites.
- 108 or 123 cm working widths
- 7,560–8,610 m²/h theoretical output
- 260 L solution / 260 L recovery tanks
- 36 V battery system
- 420–480 Ah battery capacity
- 126 cm squeegee width
- Up to 15% gradient capability with applicable X-AC configuration
- Approx. 1,350–1,385 kg ready for use
Technical Specifications
Key technical data across Scrubmaster B260R configurations.
Cleaning Performance
Published Scrubmaster B260R performance using the current Hako Australia product page as the primary source, supported by current official Hako technical information and the supplied CMS document.
| Specification | Detail |
|---|---|
| TB 1080 (2 disc) | 108 cm / 7,560 m²/h |
| TB 1080 (3 disc) | 108 cm / 7,560 m²/h |
| TB 1230 | 123 cm / 8,610 m²/h |
| WB 1080 cylindrical | 108 cm / 7,560 m²/h |
| Working speed | Up to 7 km/h |
| Solution / recovery tank | 260 / 260 L |
| Battery capacity | 420–480 Ah |
| Squeegee width | 126 cm |
Actual productivity varies with floor conditions, soil level, operator, brush configuration, battery configuration and site requirements.
Large-Area Productivity
Working widths up to 123 cm and theoretical performance up to 8,610 m²/h support major floor-cleaning programs.
Four Brush Configurations
Choose two-disc, three-disc or twin cylindrical-brush systems to match different floor types and cleaning requirements.
260-Litre Tanks
High-capacity solution and recovery tanks reduce refill and emptying interruptions during long cleaning shifts.
High-Capacity Battery
Battery capacities up to 480 Ah support extended operating periods across expansive facilities.
Onboard Dosing System
The 20 L dosing tank maintains a consistent detergent concentration as water flow changes.
Chemical on Demand
Optional dosing allows detergent to be added only when required to help reduce chemical consumption.
Up to 15% Gradient Capability
With the applicable X-AC drive configuration, the machine can clean on suitable ramps and inclines up to 15%.
Optional Pre-Sweep / Vacuum Unit
Loose dirt can be collected before wet cleaning to reduce the need for a separate pre-cleaning pass.