Sweepmaster 1500RH.
Hako’s high-capacity industrial ride-on vacuum sweeper for very large areas, combining a 250 L high-dump hopper, a working width up to 162 cm and multiple drive options for demanding indoor and outdoor applications..
Australia Wide Delivery
Expert Support
Technical advice from selection to commissioning.
Serviced & Maintained
Built for Tough Sites
Professional sweeping. Built for heavy-duty work.
The Hako Sweepmaster 1500RH is the largest and highest-capacity machine in Hako’s Sweepmaster ride-on range, engineered for sustained sweeping across expansive industrial and commercial sites.
It combines a 250 L hydraulic high-dump hopper, robust steel construction and high-efficiency dust control with a working width of up to 162 cm and area performance of up to 16,200 m²/h.
Battery, petrol and diesel drive configurations allow the machine to be matched to indoor or outdoor environments, while the electronically assisted one-button operating system and accessible maintenance design support efficient day-to-day operation.
- 92 cm main sweeping width
- 127 cm with 1 side brush / 162 cm with 2 side brushes
- Up to 16,200 m²/h theoretical area output
- 250 L hydraulic high-dump hopper
- Dump height up to 152 cm
- Battery, petrol or diesel drive options
- 7.5 m² cassette filter with R²S cleaning
- 1,100–1,715 kg depending on configuration
Technical Specifications
Key technical data.
Sweeping Performance
Published model-specific sweeping performance using the current Hako Australia listing as the primary source, supplemented by official Hako technical information and the supplied CMS document where required.
| Specification | Detail |
|---|---|
| Main sweeping width | 92 cm |
| Working width with 1 side brush | 127 cm |
| Working width with 2 side brushes | 162 cm |
| Area performance | 10,200–16,200 m²/h depending on drive and brush configuration |
| Working speed | 8 km/h battery / 10 km/h petrol-diesel |
| Dirt hopper | 250 L |
| High-dump height | Up to 152 cm |
| Filter surface | 7.5 m² |
Actual productivity varies with surface conditions, debris load, operator, brush setup and machine configuration.
High-Capacity Sweeping
A working width of up to 162 cm and area performance of up to 16,200 m²/h support efficient cleaning of expansive industrial sites.
250 L High Dump
The large hydraulic hopper raises to a dumping height of up to 152 cm for direct emptying into suitable waste containers.
Flexible Drive Options
Battery, petrol and diesel configurations provide options for enclosed facilities and demanding outdoor applications.
R²S Filter Cleaning
Hako’s patented resonance filter-cleaning technology helps maintain airflow and consistent dust-control performance.
ABBA Wear Compensation
Automatic-Hopper-Broom-Adjustment helps maintain an effective sweeping pattern throughout the main brush lifecycle.
Coarse-Dirt Flap
Larger pieces of debris, plastic film and straps can be collected while helping contain dust within the sweeping system.
One-Button Operation
Electronically assisted controls simplify key sweeping functions and reduce operator training requirements.
Robust Steel Construction
Heavy-duty chassis construction and corrosion protection support long service life under severe operating conditions.